产品类别
- LOGO!逻辑模块
- SIMATIC S7-1200基本控制器
- SIMATIC S7-1500基本控制器
-
- CPU 1511-1 PN
- CPU 1511C-1 PN
- CPU 1511F-1 PN
- CPU 1512C-1 PN
- CPU 1513-1 PN
- CPU 1515-2 PN
- CPU 1516-3 PN/DP
- CPU 1517-3 PN/DP
- CPU 1518-4 PN/DPP
- CPU 1518-4 PN/DP MFP
- SM 521 数字输入模块
- SM 522 数字输出模块
- SM 523 数字输入输出模块
- SM 531模拟输入模块
- SM 532模拟输出模块
- SM 533模拟输入输出模块
- TM计数2x24V计数器模块
- TM POS2输入计数器和位置检测模块
- TM定时器DIDQ 16x24V基于时间的IO模块
- PTO的TM PTO 4接口模块(脉冲序列输出)
- TM Siwarex WP521 ST/WP522 ST重量模块
- CM PtP
- TIM 1531 IRC (for S7-1500)
- 控制柜用SCALANCE W774 RJ45
- 控制柜用SCALANCE W734 RJ45
- 前连接器
- 前连接器模块
- 连接电缆
- 连接模块
- 带有单线的前连接器
- HMI第二代标准设备
- 常规SINAMICS G 变频器
- SINAMICS S120 驱动系统
- V90 伺服电机
- 1PH8 异步电机
- 1PH8 伺服电机 (同步)
- 电源电缆 (预装/原装线缆)
- 信号电缆 (预装/原装线缆)
-
- 信号电缆,适用于SINUMERIK 808D高级
- 信号电缆,适用于SINUMERIK 828D-PPU 27x.4/PPU 290.4
- 信号电缆,适用于SINUMERIK 840D sl - NCU 7x0.3
- 信号电缆,适用于SINUMERIK TCU
- 信号电缆,适用于SINUMERIK HT 2/HT 8/HT 10
- 信号电缆,适用于SINUMERIK Analog Drive Interface for 4 Axes ADI 4
- 信号电缆,适用于SINUMERIK PP 72/48D PN I/O module
- 信号电缆,适用于SIMOTION C240/C240 PN Motion Controllers
- 信号电缆,适用于SIMOTION D410-2 Control Units
- 信号电缆,适用于SIMOTION D4x5-2 Control Units
- 信号电缆,适用于SIMOTION D4x5-2 Control Units
- SINAMICS S110 信号电缆
- SINAMICS S120 信号电缆,用于生产机械
- SINAMICS S120 信号电缆,用于生产机械
- 信号电缆,适用于SINAMICS S120 Motor Module - SINUMERIK 828D
- 信号电缆,适用于SINAMICS S120 Motor Module - SINUMERIK 840D sl
- 信号电缆,适用于SINAMICS S120 Motor Module - SINUMERIK ONE
- 信号电缆,适用于SINAMICS S120 Motor Module - SIMOTICS L-1FN3
- 信号电缆,适用于SINAMICS S120 Motor Module - SIMOTICS M-1FE1/M-1FE2 und T-1FW6
- 信号电缆,适用于SINAMICS S120 Motor Module - SIMOTICS 2SP1
- 信号电缆,适用于SINAMICS S120 Motor Module - SIMOTICS 2SP1 with SMI24
- 信号电缆,适用于SINAMICS S120M - distributed servo drive
- 信号电缆,适用于SINAMICS S120 Combi Power Module - SINUMERIK 840D sl
- 信号电缆,适用于SINAMICS S120 Combi Power Module - SINUMERIK 828D
- 信号电缆,适用于SINAMICS S120 - SIMOTICS S-1FT7/S-1FK7
- 信号电缆,适用于SINAMICS S120 - SIMOTICS RJ45/M17 and external measuring systems M12/RJ45
- 信号电缆,适用于SINAMICS S120 Control Units CU320-2
- 信号电缆,适用于SINAMICS S120 SMC10
- 信号电缆,适用于SINAMICS S120 SMC20
- 信号电缆,适用于SINAMICS S120 SMC30
- 信号电缆,适用于SINAMICS S120 HLA
- SINAMICS V70伺服驱动器的运动连接电缆
- SINAMICS V70主轴驱动的运动连接电缆
- IE FC TP 电缆 2 x 2
- PROFIBUS FastConnect
- SpliTConnect
- AS-Interface 异形电缆
- 1FT7 伺服电机
- 1FK7 伺服电机
- 1FK2 伺服电机
- SIMOTICS L 直线电机
- SIMOTICS T 扭矩电机
- SIMOTICS S-1FG1 伺服齿轮电机
- 电机主轴
- 驱动技术其他部件
- SIMATIC HMI 控制和监视系统
- SIMATIC HMI 附件
-
- WinCC DataMonitor
- WinCC/DataMonitor
- IE FC TP cable 4 x 2
- IE FC TP cable 2 x 2
- IE FC RJ45 plug 4 x 2, Cat6a
- IE FC RJ45 接头 2 x 2,Cat5e
- RS 485 总线连接器
- IE TP 软线
- 连接电缆
- 连接电缆 830-1T
- 存储卡
- 服务包
- 工业 4 口 USB Hub
- 电源
- 电池
- 后盖
- 夹架
- 运输和储存包
- 防护罩
- 保护膜
- 贴标条
- 输入装置
- 触摸屏手写笔和触控笔
- HMI连接配件
- 适合控制柜的 SCALANCE W788 RJ45
- 室内用 SCALANCE W788 M12
- 适合广泛环境条件的 SCALANCE W788 M12 EEC
- 户外用 SCALANCE W786 RJ45
- 户外用的 SCALANCE W786 SFP
- 适合控制柜的 SCALANCE W774 RJ45
- 适合广泛环境条件的 SCALANCE W774 M12 EEC
- 适合控制柜的 SCALANCE W761 RJ45
- KEY-PLUG W700
- PS791-2DC 和 PS791-2AC 电源
- PS791-2DC 和 PS791-2AC 电源
- SIMATIC RF1070R
- 电子标签 MDS E600
- MDS D100
- 其它附件
- SIMATIC HMI 软件
-
- SIMATIC WinCC (TIA Portal) Engineering
- WinCC Runtime Advanced
- WinCC Runtime Professional
- WinCC Runtime 通信
- WinCC Recipes
- WinCC Logging
- WinCC Audit
- WinCC Sm@rtServer
- SIMATIC Logon
- WinCC Server / WinCC Client
- WinCC Redundancy
- WinCC WebNavigator
- WinCC WebUX
- WinCC DataMonitor
- WinCC IndustrialDataBridge
- SIMATIC Process Historian
- SIMATIC Information Server
- 低压电机(标准工业电机)
- 低压大功率电机
- 其他产品
相关下载
产品筛选
> 3SK2112-1AA10 > 返回

现货推荐产品
产品 | ||||||||||||||||||||||||||||||||||||||||
商品编号(市售编号) | 3SK2112-1AA10 | |||||||||||||||||||||||||||||||||||||||
产品说明 | SIRIUS 安全开关设备 基础设备 3SK2 系列 10 F-DI,2 F-DQ,1 DQ,24 V DC 可参数化,通过 SIRIUS Safety ES 22.5 mm 结构宽度 螺栓型端子 最高 SIL 3(IEC 62061) 至性能等级 e (ISO 13849-1) 输出扩展 3SK1, 耦合继电器 3RQ1 和 故障安全型电机起动器 3RM1 通过设备连接器 可连接 | |||||||||||||||||||||||||||||||||||||||
产品家族 | SIRIUS 3SK2 基本模块 | |||||||||||||||||||||||||||||||||||||||
产品生命周期 (PLM) | PM300:有效产品 | |||||||||||||||||||||||||||||||||||||||
金属系数 | 无 | |||||||||||||||||||||||||||||||||||||||
交付信息 | ||||||||||||||||||||||||||||||||||||||||
出口管制规定 | AL : N / ECCN : 9N9999 | |||||||||||||||||||||||||||||||||||||||
工厂生产时间 | 3 天 | |||||||||||||||||||||||||||||||||||||||
净重 (Kg) | 0.221 Kg | |||||||||||||||||||||||||||||||||||||||
包装尺寸 | 36.00 x 109.00 x 152.00 | |||||||||||||||||||||||||||||||||||||||
包装尺寸单位的测量 | MM | |||||||||||||||||||||||||||||||||||||||
数量单位 | 1 件 | |||||||||||||||||||||||||||||||||||||||
包装数量 | 1 | |||||||||||||||||||||||||||||||||||||||
其他产品信息 | ||||||||||||||||||||||||||||||||||||||||
EAN | 4047621004914 | |||||||||||||||||||||||||||||||||||||||
UPC | 未提供 | |||||||||||||||||||||||||||||||||||||||
商品代码 | 85371098 | |||||||||||||||||||||||||||||||||||||||
LKZ_FDB/ CatalogID | CC-IC10 | |||||||||||||||||||||||||||||||||||||||
产品组 | 3761 | |||||||||||||||||||||||||||||||||||||||
组代码 | R711 | |||||||||||||||||||||||||||||||||||||||
原产地 | 德国 | |||||||||||||||||||||||||||||||||||||||
Compliance with the substance restrictions according to RoHS directive | RoHS 合规开始日期: 2009.05.28 | |||||||||||||||||||||||||||||||||||||||
产品类别 | A: 问题无关,即刻重复使用 | |||||||||||||||||||||||||||||||||||||||
电气和电子设备使用后的收回义务类别 | - | |||||||||||||||||||||||||||||||||||||||
REACH Art. 33 责任信息 |
|
|||||||||||||||||||||||||||||||||||||||
SCIP number | ||||||||||||||||||||||||||||||||||||||||
分类 | ||||||||||||||||||||||||||||||||||||||||
|
相关配套产品
- EMERGENCY STOP mushroom pushbutton, 22 mm, round, plastic, red, 40 mm, positive latching, acc. to EN ISO 13850, rotate-to-unlatch, without yellow backing plate, with holder, 1 NC, 1 NC, screw terminal
- EMERGENCY STOP mushroom pushbutton, 22 mm, round, metal, shiny, red, 30 mm, positive latching, according to DIN EN ISO 13850, rotate-to-unlatch, washer for EMERGENCY STOP, yellow, 60 mm, without inscription, with holder, 1 NC, 1 NC, spring-loaded terminal, front plate mounting
- EMERGENCY STOP mushroom pushbutton, illuminable, 22 mm, round, metal, shiny, red, 40 mm, positive latching, according to DIN EN ISO 13850, rotate-to-unlatch, with yellow backing plate, without inscription, with holder, 1 NC, 1 NC, LED 24 V red, spring-loaded terminal, front plate mounting
- Failsafe reversing starter High Feature; Incl. fan (3RW4928-8VB00); Electronic switching; Electronic overload protection up to 5.5 kW / 400 V; Adjustment range 4.0 .. 12 A; PROFIenergy; Option: 3DI/LC module
- power contactor, AC-3e/AC-3, 12 A, 5.5 kW / 400 V, 3-pole, 24 V DC, 0.7-1.25* Us, with integrated suppressor diode, auxiliary contacts: 1 NC, spring-loaded terminal, frame size: S00, suitable for PLC outputs, not expandable with auxiliary switch expandable
- power contactor, AC-3e/AC-3, 80 A, 37 kW / 400 V, 3-pole, 24 V DC, 0.8-1.2* Us, with integrated varistor, auxiliary contacts: 1 NO + 1 NC, main circuit: screw terminal, control and auxiliary circuit: spring-loaded terminal, frame size: S2, suitable for PLC outputs
- power contactor, AC-3e/AC-3 185 A, 90 kW / 400 V AC (50-60 Hz) / DC Uc: 200-277 V x (0.8-1.1) F-PLC input 24 V DC 3-pole, auxiliary contacts 2 NO + 2 NC drive: electronic main circuit: busbar control and auxiliary circuit: screw terminal
- power contactor, AC-3e/AC-3 300 A, 160 kW / 400 V, AC (50-60 Hz) / DC 200-277 V x (0.8-1.1) F-PLC input 24 V DC 3-pole, auxiliary contacts 2 NO + 2 NC drive: electronic main circuit: busbar control and auxiliary circuit: screw terminal
- power contactor, AC-3e/AC-3 500 A, 250 kW / 400 V AC (50-60 Hz) / DC 200-277 V x (0.8-1.1) F-PLC input 24 V DC 3-pole, auxiliary contacts 2 NO + 2 NC drive: electronic main circuit: busbar control and auxiliary circuit: screw terminal
- power contactor, AC-3e/AC-3, 38 A, 18.5 kW / 400 V, 3-pole, 24 V DC, with plugged-in varistor, auxiliary contacts: 1 NO + 1 NC, spring-loaded terminal, size: S0
- Pushbutton, 22 mm, round, metal, shiny, blue, pushbutton, flat, momentary contact type, 1 NO, screw terminal
- Enclosure for command devices, 22 mm, round, Enclosure material plastic, Enclosure top part yellow, with protective collar, 1 control point plastic, A=EMERGENCY STOP mushroom pushbutton red, 40 mm, rotate-to-unlatch, 1 NC, 1 NC, screw terminal, floor mounting, 1xM20 each on top and bottom
- two-hand operation console for command devices, 22 mm, round, enclosure material metal, enclosure top part gray, 3 command points metal, standard equipment: 2 mushroom pushbuttons black 40 mm, 2x 1 NO+1 NC, screw terminal, 1x EMERGENCY STOP red, 40 mm, 2 NC, screw terminal
- Safety position switch with separate actuator Plastic enclosure, 31 mm Device connection 1x (M20x 1.5) Slow-action contacts 2 NC/1 NO, 5 directions of approach, The matching separate actuator 3SE5000-0AV0. must be ordered separately
- Safety position switch with separate actuator Molded-plastic enclosure lateral and face-end Slow-action contacts 1 NO+2 NC, 3 x (M20 x 1.5) Pull-out force 30 N Supplied without actuator
- safety foot switch 1-pedal, with protective cover, IP65, with interlock function, 2 NO+2 NC, NO contact, closes as pushbutton, NC contact, opens with simultaneous latching (safety function), cable entry M20 x 1.5
- Hinge switch Plastic enclosure 40 mm according to EN 50041 Device connection 1 x (M20 x 1.5) Snap-action contacts 2 NC/1 NO integrated, with solid shaft Diameter = 10 mm Actuating angle 10°
- Position switch Plastic enclosure according to EN 50047, 31 mm Device connection 1 x (M20 x 1.5) 1 NO/1 NC quick action contacts integrated (not replaceable) Twist lever, 35 mm long right/left adjustable with plastic roller 19 mm
- Safety position switch with tumbler Locking force 1300 N 5 directions of approaches Spring-locked Escape release from the rear and auxiliary release with lock on the front Magnet voltage 24 V DC Monitoring actuator 2 NC/1 NO Monitoring magnet 2 NC/1 NO Actuator 3SE5000-0AV0. please order separately
- magnetically operated switch contact block rectangular large: 25 x 88 mm, 2 NC, with M8 plug 4-pole, required solenoid 3SE6704-2BA or with increased operating distance 3SE6701-2BA accessory: coupling with connection cable 5 m 3SX5601-3GA05
- magnetically operated switch contact block round M30 contact elements 1 NO+1 NC with 3 m cable, required solenoid 3SE6704-1BA
- safety cable-operated switch metal enclosure, 2 xM20x1.5; with yellow cover with latching according to EN ISO 13850 button reset, with LED lamp 24 V DC, red, for wire lengths up to 20 m
- Enclosure for command devices, 22 mm, round, Enclosure material plastic, Enclosure top part yellow, 1 control point plastic, Control point in center, A=EMERGENCY STOP mushroom pushbutton red, 40 mm, rotate-to-unlatch, 1 NC, 1NC, screw terminal, floor mounting, 1xM20 each on top and bottom
- Complete unit signaling column, top: continuous light, blue, center: continuous light, green, integrated LED 24 V AC/DC, bottom: Single-flash light element, clear, integr. flashlight electronics 24 V DC, connection element for pipe mounting, pipe, 250 mm, base, plastic
- power contactor, AC-3e/AC-3, 80 A, 37 kW / 400 V, 3-pole, 21-33 V AC/DC, 50/60 Hz, with integrated varistor, auxiliary contacts: 1 NC, main circuit: screw terminal, control and auxiliary circuit: spring-loaded terminal, size: S2, F-PLC-IN
- power contactor, AC-3e/AC-3, 110 A, 55 kW / 400 V, 3-pole, 21-33 V AC/DC, 50/60 Hz, with integrated varistor, auxiliary contacts: 1 NC, main circuit: screw terminal, control and auxiliary circuit: spring-loaded terminal, size: S3, F-PLC-IN
- RFID safety switch with tumbler, plastic, with escape release, red levers mountable on two sides, quiescent current principle, tumbler monitoring, 24 V DC, IP69, locking force 1150 N, family-encoded, diagnostics output, M12 plug 8-pole, 3 LEDs for display of the operating states, 3 directions of actuation, latching force with turnstile adjustable: 25 N or 50 N, hygienic design, actuator 3SE6410-1AC01 to be ordered separately
- electronically configurable signaling column, conventional, 15 segments, with acoustics, M12 plug, 8-pole
- contact-free safety switch RFID rectangular 106 mm x 25 mm individually encoded, multiple teach-in capability, with M12 plug 8-pole and magnet latching 18 N, order actuator separately: 3SE6310-1BC01
- device identification labels, for SIRIUS devices, 20x7 mm, titanium gray, package contents: 17 sheets with 20 labels each
- Device connector for 3SK2 safety relay Width 22.5 mm for electrical connection of SIRIUS devices in industrial standard mounting rail enclosure
- SIRIUS, interface module PROFINET interface for safety relay 3SK2 from E05 and 3RK312/3RK313 from E04 PROFINET IO interface 100 Mbps, RJ45 22.5 mm width screw terminal parameter assignment via Safety ES without connection cable
- Push-in lugs for wall mounting of SIRIUS devices in industrial standard mounting rail enclosure
- Fail-safe direct starter, 3RM1, 500 V, 0 - 0.12 kW, 0.1 - 0.5 A, 24 V DC, screw terminals
- fail-safe direct-on-line starter, 3RM1, 500 V, 0 - 0.12 kW, 0.1 - 0.5 A, 24 V DC, spring-loaded terminal (push-in)
- fail-safe direct-on-line starter, 3RM1, 500 V, 0 - 0.12 kW, 0.1 - 0.5 A, 24 V DC, screw/spring-loaded terminals (push-in)
- Fail-safe direct starter, 3RM1, 500 V, 0.09 - 0.75 kW, 0.4 - 2 A, 24 V DC, screw terminals
- fail-safe direct-on-line starter, 3RM1, 500 V, 0.09 - 0.75 kW, 0.4 - 2 A, 24 V DC, spring-loaded terminal (push-in)
- fail-safe direct-on-line starter, 3RM1, 500 V, 0.09 - 0.75 kW, 0.4 - 2 A, 24 V DC, screw/spring-loaded terminals (push-in)
- Fail-safe direct starter, 3RM1, 500 V, 0.55 - 3 kW, 1.6 - 7 A, 24 V DC, screw terminals
- fail-safe direct-on-line starter, 3RM1, 500 V, 0.55 - 3 kW, 1.6 - 7 A, 24 V DC, spring-loaded terminal (push-in)
- fail-safe direct-on-line starter, 3RM1, 500 V, 0.55 - 3 kW, 1.6 - 7 A, 24 V DC, screw/spring-loaded terminals (push-in)
- Fail-safe reversing starter, 3RM1, 500 V, 0 - 0.12 kW, 0.1 - 0.5 A, 24 V DC, screw terminals
- Failsafe reversing starter, 3RM1, 500 V, 0 - 0.12 kW, 0.1 - 0.5 A, 24 V DC, spring-loaded terminal (push-in)
- Failsafe reversing starter, 3RM1, 500 V, 0 - 0.12 kW, 0.1 - 0.5 A, 24 V DC, screw/spring-loaded terminals (push-in)
- Fail-safe reversing starter, 3RM1, 500 V, 0.09 - 0.75 kW, 0.4 - 2 A, 24 V DC, screw terminals
- Failsafe reversing starter, 3RM1, 500 V, 0.09 - 0.75 kW, 0.4 - 2 A, 24 V DC, spring-loaded terminal (push-in)
- Failsafe reversing starter, 3RM1, 500 V, 0.09 - 0.75 kW, 0.4 - 2 A, 24 V DC, screw/spring-loaded terminals (push-in)
- Fail-safe reversing starter, 3RM1, 500 V, 0.55 - 3 kW, 1.6 - 7 A, 24 V DC, screw terminals
- Failsafe reversing starter, 3RM1, 500 V, 0.55 - 3 kW, 1.6 - 7 A, 24 V DC, spring-loaded terminal (push-in)
- Failsafe reversing starter, 3RM1, 500 V, 0.55 - 3 kW, 1.6 - 7 A, 24 V DC, screw/spring-loaded terminals (push-in)
- Coding pins for removable terminals of the SIRIUS devices in industrial standard mounting rail enclosure
- SIRIUS safety relay Output expansion 4RO with relay enabling circuits 4 NO contacts plus Relay signaling circuit 1 NC contact Us = 24 V DC screw terminal
- SIRIUS safety relay Output expansion 4RO with relay enabling circuits 4 NO contacts plus Relay signaling circuit 1 NC contact Us = 24 V DC Spring-type terminal (push-in)
- SIRIUS safety relay Output expansion 3RO Power, with Relay enabling circuits 3 NO contacts plus Relay signaling circuit 1 NC contact Us = 24 V DC screw terminal
- SIRIUS safety relay Output expansion 3RO Power, with Relay enabling circuits 3 NO contacts plus Relay signaling circuit 1 NC contact Us = 24 V DC Spring-type terminal (push-in)
- SIRIUS, Diagnostics display for 3SK2 and modular Safety system 3RK3 for displaying diagnostics data
- Door adapter, installation in control cabinet door or front plate, for bringing out only the system interface
- Positively driven coupling relay in industrial enclosure 1 NO contact / 1 NC contact 24 V DC SIL 2 / PL c screw terminal
- Positively driven coupling relay in industrial enclosure 2 NO contacts / 1 NC contact 24 V DC SIL 2 / PL c screw terminal
- Positively driven coupling relay in industrial enclosure 2 NO contacts / 2 NC contacts 24 V DC SIL 2 / PL c screw terminal
- Positively driven coupling relay in industrial enclosure 4 NO contacts / 1 NC contact 24 V DC SIL 2 / PL c screw terminal
- Positively driven coupling relay in industrial enclosure 1 NO contact / 1 NC contact 24 V DC SIL 2 / PL c spring-type terminal (push-in)
- Positively driven coupling relay in industrial enclosure 2 NO contacts / 1 NC contact 24 V DC SIL 2 / PL c spring-type terminal (push-in)
- Positively driven coupling relay in industrial enclosure 2 NO contacts / 2 NC contacts 24 V DC SIL 2 / PL c spring-type terminal (push-in)
- Positively driven coupling relay in industrial enclosure 4 NO contacts / 1 NC contact 24 V DC SIL 2 / PL c spring-type terminal (push-in)
- force-guided coupling relay in industrial enclosure 1 NO contact / 1 NC contact (24 V) 24 V DC SIL 3 / PL e screw terminal
- force-guided coupling relay in industrial enclosure 1 NO contact / 1 NC contact (24 V) 24 V DC SIL 3 / PL e spring-loaded terminal (push-in)
- SIRIUS safety relay basic unit 3SK2 series 20 F-DI, 4 F-DQ, 2 DQ, 24 V DC Can be parameterized via SIRIUS Safety ES 45 mm width screw terminal up to SIL 3 (IEC 62061) up to performance level e (ISO 13849-1) output expansions 3SK1, coupling relay 3RQ1 and fail-safe motor starters 3RM1 via device connector connectable
- USB PC cable for connection to the USB interface of a PC length 2.5 m, for communication with SIMOCODE pro or SIRIUS 3RW44 soft starter or safety system 3SK2 and 3RK3 via the system interface
- SIRIUS Safety ES V19 Professional floating license for 1 user engineering software, software and documentation on DVD license key on USB flash drive, class A 6 languages; de,en,zh included, fr,es,it for download executable in: Windows 10 - 64-bit (Professional/Enterprise) / Windows 11 (Home/Professional/Enterprise) Windows Server 2016/2019/2022 64-bit Standard reference hardware: 3SK2 online functions via system interface and opt. DP/PN interface
- SIRIUS Safety ES V19 Professional upgrade for Safety ES V1.0 for Standard/Premium floating license for one user engineering software, software and documentation on DVD license key on USB flash drive, class A 6 languages; de,en,zh included, fr,es,it for download executable in: Windows 10 - 64-bit (Professional/Enterprise) / Windows 11 (Home/Professional/Enterprise) / Windows Server 2016/2019/2022 64-bit Standard reference hardware: 3SK2 online functions via system interface and opt. DP/PN interface