产品类别
- LOGO!逻辑模块
- SIMATIC S7-1200基本控制器
- SIMATIC S7-1500基本控制器
-
- CPU 1511-1 PN
- CPU 1511C-1 PN
- CPU 1511F-1 PN
- CPU 1512C-1 PN
- CPU 1513-1 PN
- CPU 1515-2 PN
- CPU 1516-3 PN/DP
- CPU 1517-3 PN/DP
- CPU 1518-4 PN/DPP
- CPU 1518-4 PN/DP MFP
- SM 521 数字输入模块
- SM 522 数字输出模块
- SM 523 数字输入输出模块
- SM 531模拟输入模块
- SM 532模拟输出模块
- SM 533模拟输入输出模块
- TM计数2x24V计数器模块
- TM POS2输入计数器和位置检测模块
- TM定时器DIDQ 16x24V基于时间的IO模块
- PTO的TM PTO 4接口模块（脉冲序列输出）
- TM Siwarex WP521 ST/WP522 ST重量模块
- CM PtP
- TIM 1531 IRC (for S7-1500)
- 控制柜用SCALANCE W774 RJ45
- 控制柜用SCALANCE W734 RJ45
- 前连接器
- 前连接器模块
- 连接电缆
- 连接模块
- 带有单线的前连接器
- HMI第二代标准设备
- 常规SINAMICS G 变频器
- SINAMICS S120 驱动系统
- V90 伺服电机
- 1PH8 异步电机
- 1PH8 伺服电机 (同步)
- 电源电缆 （预装/原装线缆）
- 信号电缆 （预装/原装线缆）
-
- 信号电缆，适用于SINUMERIK 808D高级
- 信号电缆，适用于SINUMERIK 828D-PPU 27x.4/PPU 290.4
- 信号电缆，适用于SINUMERIK 840D sl - NCU 7x0.3
- 信号电缆，适用于SINUMERIK TCU
- 信号电缆，适用于SINUMERIK HT 2/HT 8/HT 10
- 信号电缆，适用于SINUMERIK Analog Drive Interface for 4 Axes ADI 4
- 信号电缆，适用于SINUMERIK PP 72/48D PN I/O module
- 信号电缆，适用于SIMOTION C240/C240 PN Motion Controllers
- 信号电缆，适用于SIMOTION D410-2 Control Units
- 信号电缆，适用于SIMOTION D4x5-2 Control Units
- 信号电缆，适用于SIMOTION D4x5-2 Control Units
- SINAMICS S110 信号电缆
- SINAMICS S120 信号电缆，用于生产机械
- SINAMICS S120 信号电缆，用于生产机械
- 信号电缆，适用于SINAMICS S120 Motor Module - SINUMERIK 828D
- 信号电缆，适用于SINAMICS S120 Motor Module - SINUMERIK 840D sl
- 信号电缆，适用于SINAMICS S120 Motor Module - SINUMERIK ONE
- 信号电缆，适用于SINAMICS S120 Motor Module - SIMOTICS L-1FN3
- 信号电缆，适用于SINAMICS S120 Motor Module - SIMOTICS M-1FE1/M-1FE2 und T-1FW6
- 信号电缆，适用于SINAMICS S120 Motor Module - SIMOTICS 2SP1
- 信号电缆，适用于SINAMICS S120 Motor Module - SIMOTICS 2SP1 with SMI24
- 信号电缆，适用于SINAMICS S120M - distributed servo drive
- 信号电缆，适用于SINAMICS S120 Combi Power Module - SINUMERIK 840D sl
- 信号电缆，适用于SINAMICS S120 Combi Power Module - SINUMERIK 828D
- 信号电缆，适用于SINAMICS S120 - SIMOTICS S-1FT7/S-1FK7
- 信号电缆，适用于SINAMICS S120 - SIMOTICS RJ45/M17 and external measuring systems M12/RJ45
- 信号电缆，适用于SINAMICS S120 Control Units CU320-2
- 信号电缆，适用于SINAMICS S120 SMC10
- 信号电缆，适用于SINAMICS S120 SMC20
- 信号电缆，适用于SINAMICS S120 SMC30
- 信号电缆，适用于SINAMICS S120 HLA
- SINAMICS V70伺服驱动器的运动连接电缆
- SINAMICS V70主轴驱动的运动连接电缆
- IE FC TP 电缆 2 x 2
- PROFIBUS FastConnect
- SpliTConnect
- AS-Interface 异形电缆
- 1FT7 伺服电机
- 1FK7 伺服电机
- 1FK2 伺服电机
- SIMOTICS L 直线电机
- SIMOTICS T 扭矩电机
- SIMOTICS S-1FG1 伺服齿轮电机
- 电机主轴
- 驱动技术其他部件
- SIMATIC HMI 控制和监视系统
- SIMATIC HMI 附件
-
- WinCC DataMonitor
- WinCC/DataMonitor
- IE FC TP cable 4 x 2
- IE FC TP cable 2 x 2
- IE FC RJ45 plug 4 x 2, Cat6a
- IE FC RJ45 接头 2 x 2，Cat5e
- RS 485 总线连接器
- IE TP 软线
- 连接电缆
- 连接电缆 830-1T
- 存储卡
- 服务包
- 工业 4 口 USB Hub
- 电源
- 电池
- 后盖
- 夹架
- 运输和储存包
- 防护罩
- 保护膜
- 贴标条
- 输入装置
- 触摸屏手写笔和触控笔
- HMI连接配件
- 适合控制柜的 SCALANCE W788 RJ45
- 室内用 SCALANCE W788 M12
- 适合广泛环境条件的 SCALANCE W788 M12 EEC
- 户外用 SCALANCE W786 RJ45
- 户外用的 SCALANCE W786 SFP
- 适合控制柜的 SCALANCE W774 RJ45
- 适合广泛环境条件的 SCALANCE W774 M12 EEC
- 适合控制柜的 SCALANCE W761 RJ45
- KEY-PLUG W700
- PS791-2DC 和 PS791-2AC 电源
- PS791-2DC 和 PS791-2AC 电源
- SIMATIC RF1070R
- 电子标签 MDS E600
- MDS D100
- 其它附件
- SIMATIC HMI 软件
-
- SIMATIC WinCC (TIA Portal) Engineering
- WinCC Runtime Advanced
- WinCC Runtime Professional
- WinCC Runtime 通信
- WinCC Recipes
- WinCC Logging
- WinCC Audit
- WinCC Sm@rtServer
- SIMATIC Logon
- WinCC Server / WinCC Client
- WinCC Redundancy
- WinCC WebNavigator
- WinCC WebUX
- WinCC DataMonitor
- WinCC IndustrialDataBridge
- SIMATIC Process Historian
- SIMATIC Information Server
- 低压电机(标准工业电机)
- 低压大功率电机
- 其他产品
相关下载
产品筛选
> 3SE5212-0LC05-1CA0 > 返回
现货推荐产品
相关配套产品
3SE5212-0CC05-1CA0
- Position switch with increased corrosion protection Metal enclosure according to EN 50047, 31 mm Device connection 1 x (M20 x 1.5) 1 NO/1 NC quick action contacts (replaceable) with plunger
3SE5212-0KC05-1CA0
- Position switch with increased corrosion protection Metal enclosure according to EN 50047, 31 mm Device connection 1 x (M20 x 1.5) 1 NO/2 NC slow-action contacts with plunger
3SE5212-0MC05-1CA0
- Position switch with increased corrosion protection Metal enclosure according to EN 50047, 31 mm Device connection 1 x (M20 x 1.5) 1 NO/2 NC slow-action contacts with make-before-break with plunger
3SE5212-0LC05
- Position switch Metal enclosure according to EN 50047, 31 mm Device connection 1 x (M20 x 1.5) 1 NO/2 NC quick action contacts Rounded plunger, Form B
3SE5232-0LC05-1CA0
- Position switch with increased corrosion protection Plastic enclosure according to EN 50047, 31 mm Device connection 1 x (M20 x 1.5) 1 NO/2 NC quick action contacts Teflon plunger
3SE5000-0AC30
- protective cover, accessories for position switch according to EN 50047/metal and plastic for protection of rounded plunger made of plastic
3SY3128
- Accessory for position switch Connector plug (5-pole), M12, for M20 x 1.5 for 125 V, 4 A on Pin 5 a yellow/green cable for PE
3SX5601-3SB55
- connecting cable with M12 socket 5-pole and bare cable end, 5 m long, for connecting position switch 3SE51/52, wired with M12 plug, 5-pole
3SX9926
- Cable gland molded plastic for position switch, M20x 1.5 for cable diameter: 5-13 mm
3SE5000-0AK00
- Pivoting lever drive (Please order lever separately) for position switch 3SE52/3SF12 für 31/50 mm, Switch points according to EN 50047. The switching direction the lever is on left / right or left only or only to the right. Delivery state ist right / left.
3SE5000-0AB01
- actuator head for position switch 3SE51/52, plain plunger made of stainless steel
3SE5000-0AD03
- Actuator head for position switch 3SE51/52 Roller plunger, Form C, with Plastic roller 10 mm according to EN 50047
3SE5000-0AD04
- Actuator head for position switch 3SE51/52 Roller plunger, Form C, with Stainless steel roller 10 mm according to EN 50047
3SE5000-0AD10
- Actuator head for position switch 3SE51/52 Roller plunger with Plastic roller 10 mm with central mounting
3SE5000-0AD11
- Actuator head for position switch 3SE51/52 Roller plunger with Stainless steel roller 10 mm with central mounting
3SE5000-0AE10
- Actuator head for position switch 3SE51/52 Roller lever, Form E, with Metal lever and Plastic roller 13 mm according to EN 50047
3SE5000-0AE11
- Actuator head for position switch 3SE51/52 Roller lever, Form E, with Metal lever and Stainless steel roller 13 mm according to EN 50047
3SE5000-0AE12
- Actuator head for position switch 3SE51/52 Roller lever, Form E, with Stainless steel lever and Plastic roller 13 mm according to EN 50047
3SE5000-0AE13
- Actuator head for position switch 3SE51/52 Roller lever, Form E, with Stainless steel lever and Stainless steel roller 13 mm according to EN 50047
3SE5000-0AF10
- Actuator head for position switch 3SE51/52 Angular roller lever Metal lever with Plastic roller 13 mm
3SE5000-0AF11
- Actuator head for position switch 3SE51/52 Angular roller lever Metal lever with Stainless steel roller 13 mm
3SE5000-0AF12
- Actuator head for position switch 3SE51/52 Angular roller lever Stainless steel lever with Plastic roller 13 mm
3SE5000-0AF13
- Actuator head for position switch 3SE51/52 Angular roller lever Stainless steel lever with Stainless steel roller 13 mm
3SE5000-0AR01
- Actuator head: spring rod for position switches 3SE51/52 only with snap-action contacts, total length 142.5 mm, Plunger = 50 mm, Plunger = 50 mm, made of plastic
3SE5000-0AR02
- Actuator head: spring rod for position switches 3SE51/52, only with snap-action contacts, total length 142.5 mm spring = 50 mm, plunger = 50 mm, made of stainless steel
3SE5000-0AR04
- Actuator head: spring rod for position switches 3SE51/52 only with snap-action contacts, total length 242.5 mm, Plunger = 150 mm, Plunger = 50 mm, made of plastic
3SE5000-0AR03
- Actuator head: spring rod for position switches 3SE51/52, only with snap-action contacts, total length 76 mm, spring= 23.5 mm, plunger = 10 mm, made of plastic
3SE5000-0LA00
- Contact block for position switch 3SE51/52 1 NO/2 NC quick action contact
3SE5212-0AC05-1CA0
- Empty enclosure for position switch made of metal with increased corrosion protection according to EN 50047, 31 mm M20 x 1.5 with cover Color turquoise and plunger
京公网安备 11011402011241号
