产品类别
- LOGO!逻辑模块
- SIMATIC S7-1200基本控制器
- SIMATIC S7-1500基本控制器
-
- CPU 1511-1 PN
- CPU 1511C-1 PN
- CPU 1511F-1 PN
- CPU 1512C-1 PN
- CPU 1513-1 PN
- CPU 1515-2 PN
- CPU 1516-3 PN/DP
- CPU 1517-3 PN/DP
- CPU 1518-4 PN/DPP
- CPU 1518-4 PN/DP MFP
- SM 521 数字输入模块
- SM 522 数字输出模块
- SM 523 数字输入输出模块
- SM 531模拟输入模块
- SM 532模拟输出模块
- SM 533模拟输入输出模块
- TM计数2x24V计数器模块
- TM POS2输入计数器和位置检测模块
- TM定时器DIDQ 16x24V基于时间的IO模块
- PTO的TM PTO 4接口模块（脉冲序列输出）
- TM Siwarex WP521 ST/WP522 ST重量模块
- CM PtP
- TIM 1531 IRC (for S7-1500)
- 控制柜用SCALANCE W774 RJ45
- 控制柜用SCALANCE W734 RJ45
- 前连接器
- 前连接器模块
- 连接电缆
- 连接模块
- 带有单线的前连接器
- HMI第二代标准设备
- 常规SINAMICS G 变频器
- SINAMICS S120 驱动系统
- V90 伺服电机
- 1PH8 异步电机
- 1PH8 伺服电机 (同步)
- 电源电缆 （预装/原装线缆）
- 信号电缆 （预装/原装线缆）
-
- 信号电缆，适用于SINUMERIK 808D高级
- 信号电缆，适用于SINUMERIK 828D-PPU 27x.4/PPU 290.4
- 信号电缆，适用于SINUMERIK 840D sl - NCU 7x0.3
- 信号电缆，适用于SINUMERIK TCU
- 信号电缆，适用于SINUMERIK HT 2/HT 8/HT 10
- 信号电缆，适用于SINUMERIK Analog Drive Interface for 4 Axes ADI 4
- 信号电缆，适用于SINUMERIK PP 72/48D PN I/O module
- 信号电缆，适用于SIMOTION C240/C240 PN Motion Controllers
- 信号电缆，适用于SIMOTION D410-2 Control Units
- 信号电缆，适用于SIMOTION D4x5-2 Control Units
- 信号电缆，适用于SIMOTION D4x5-2 Control Units
- SINAMICS S110 信号电缆
- SINAMICS S120 信号电缆，用于生产机械
- SINAMICS S120 信号电缆，用于生产机械
- 信号电缆，适用于SINAMICS S120 Motor Module - SINUMERIK 828D
- 信号电缆，适用于SINAMICS S120 Motor Module - SINUMERIK 840D sl
- 信号电缆，适用于SINAMICS S120 Motor Module - SINUMERIK ONE
- 信号电缆，适用于SINAMICS S120 Motor Module - SIMOTICS L-1FN3
- 信号电缆，适用于SINAMICS S120 Motor Module - SIMOTICS M-1FE1/M-1FE2 und T-1FW6
- 信号电缆，适用于SINAMICS S120 Motor Module - SIMOTICS 2SP1
- 信号电缆，适用于SINAMICS S120 Motor Module - SIMOTICS 2SP1 with SMI24
- 信号电缆，适用于SINAMICS S120M - distributed servo drive
- 信号电缆，适用于SINAMICS S120 Combi Power Module - SINUMERIK 840D sl
- 信号电缆，适用于SINAMICS S120 Combi Power Module - SINUMERIK 828D
- 信号电缆，适用于SINAMICS S120 - SIMOTICS S-1FT7/S-1FK7
- 信号电缆，适用于SINAMICS S120 - SIMOTICS RJ45/M17 and external measuring systems M12/RJ45
- 信号电缆，适用于SINAMICS S120 Control Units CU320-2
- 信号电缆，适用于SINAMICS S120 SMC10
- 信号电缆，适用于SINAMICS S120 SMC20
- 信号电缆，适用于SINAMICS S120 SMC30
- 信号电缆，适用于SINAMICS S120 HLA
- SINAMICS V70伺服驱动器的运动连接电缆
- SINAMICS V70主轴驱动的运动连接电缆
- IE FC TP 电缆 2 x 2
- PROFIBUS FastConnect
- SpliTConnect
- AS-Interface 异形电缆
- 1FT7 伺服电机
- 1FK7 伺服电机
- 1FK2 伺服电机
- SIMOTICS L 直线电机
- SIMOTICS T 扭矩电机
- SIMOTICS S-1FG1 伺服齿轮电机
- 电机主轴
- 驱动技术其他部件
- SIMATIC HMI 控制和监视系统
- SIMATIC HMI 附件
-
- WinCC DataMonitor
- WinCC/DataMonitor
- IE FC TP cable 4 x 2
- IE FC TP cable 2 x 2
- IE FC RJ45 plug 4 x 2, Cat6a
- IE FC RJ45 接头 2 x 2，Cat5e
- RS 485 总线连接器
- IE TP 软线
- 连接电缆
- 连接电缆 830-1T
- 存储卡
- 服务包
- 工业 4 口 USB Hub
- 电源
- 电池
- 后盖
- 夹架
- 运输和储存包
- 防护罩
- 保护膜
- 贴标条
- 输入装置
- 触摸屏手写笔和触控笔
- HMI连接配件
- 适合控制柜的 SCALANCE W788 RJ45
- 室内用 SCALANCE W788 M12
- 适合广泛环境条件的 SCALANCE W788 M12 EEC
- 户外用 SCALANCE W786 RJ45
- 户外用的 SCALANCE W786 SFP
- 适合控制柜的 SCALANCE W774 RJ45
- 适合广泛环境条件的 SCALANCE W774 M12 EEC
- 适合控制柜的 SCALANCE W761 RJ45
- KEY-PLUG W700
- PS791-2DC 和 PS791-2AC 电源
- PS791-2DC 和 PS791-2AC 电源
- SIMATIC RF1070R
- 电子标签 MDS E600
- MDS D100
- 其它附件
- SIMATIC HMI 软件
-
- SIMATIC WinCC (TIA Portal) Engineering
- WinCC Runtime Advanced
- WinCC Runtime Professional
- WinCC Runtime 通信
- WinCC Recipes
- WinCC Logging
- WinCC Audit
- WinCC Sm@rtServer
- SIMATIC Logon
- WinCC Server / WinCC Client
- WinCC Redundancy
- WinCC WebNavigator
- WinCC WebUX
- WinCC DataMonitor
- WinCC IndustrialDataBridge
- SIMATIC Process Historian
- SIMATIC Information Server
- 低压电机(标准工业电机)
- 低压大功率电机
- 其他产品
相关下载
产品筛选
> 3RV2021-1AA10-0DA0 > 返回
现货推荐产品
相关配套产品
3RV1913-1CA00
- Molded-plastic enclosure for surface mounting Degree of protection IP55 with N and PE terminal 54 mm with metric cable gland. No UL/CSA approval
3RV1913-1DA00
- Molded-plastic enclosure for surface mounting Degree of protection IP55 with N and PE terminal 72 mm with metric cable gland No UL/CSA approval
3RV1913-2DA00
- Molded-plastic installation enclosure with actuator diaphragm Metric cable gland No UL/CSA approval
3RV1923-1CA00
- Molded-plastic enclosure for surface mounting Degree of protection IP55 with N and PE terminal Can be locked in O position 54 mm with metric cable gland No UL/CSA approval
3RV1923-1FA00
- molded-plastic enclosure for surface mounting with EMERGENCY OFF rotary operating mechanism 54 mm, with metric cable bushing, no UL/CSA approval
3RV1923-1DA00
- Molded-plastic enclosure for surface mounting Degree of protection IP55 with N and PE terminal Can be locked in O position 72 mm with metric cable gland No UL/CSA approval
3RV1923-1GA00
- Molded-plastic enclosure for surface mounting with EMERGENCY-STOP rotary operating mechanism 72 mm, with metric cable gland No UL/CSA approval
3RV1923-1DA01
- Cast aluminum surface mounting enclosure Degree of protection IP65 72 mm installation width with PE terminal for circuit breaker Size S0
3RV1923-1GA01
- Cast aluminum surface mounting enclosure Degree of protection IP65 72 mm installation width, PE terminal with rotary operating mechanism yellow/red for circuit breaker Size S0
3RV1923-2DA00
- Molded-plastic installation enclosure with rotary operating mechanism, can be locked Metric cable gland No UL/CSA approval
3RV1923-2GA00
- Molded-plastic installation enclosure with emergency stop rotary operating mechanism with metric cable gland No UL/CSA approval
3RV1933-1DA00
- Molded-plastic enclosure for surface mounting Degree of protection IP55 with N and PE terminal Can be locked in O position 82 mm with metric cable gland No UL/CSA approval
3RV1933-1GA00
- Molded-plastic enclosure for surface mounting with EMERGENCY-STOP rotary operating mechanism 82 mm with metric cable gland No UL/CSA approval
3RV2901-1E
- Auxiliary switch transverse 1 NO+1 NC screw terminal for circuit breaker 3RV2
3RV2901-1D
- Auxiliary switch transverse 1 CO, screw terminal for circuit breaker 3RV2
3RV2901-1F
- Auxiliary switch transverse 2 NO, screw terminal for circuit breaker 3RV2
3RV2901-1G
- Auxiliary switch transverse solid-state compatible, 1 CO screw terminal for circuit breaker 3RV2
8US1251-5DS10
- device adapter S00/S0, 25 A, for 60 mm busbar system, 45x 200 mm long, special lines welded-on, AWG 12, 99 mm long spacer enclosed with product mounting rail screwed on
8US1251-5DT11
- device adapter S00, 25 A, for 60 mm busbar system, 45x 260 mm long, special lines welded-on, AWG 12, 167 mm long spacer enclosed with product mounting rail screwed on
8US1251-5DS11
- device adapter S00, 25 A, for 60 mm busbar system, 45x 200 mm long, special lines welded-on, AWG 12, 165 mm long spacer enclosed with product mounting rail screwed on
8US1251-5DT10
- device adapter S00, 25 A, for 60 mm busbar system, 45x 260 mm long, special lines welded-on, AWG 12, 99 mm long spacer enclosed with product mounting rail screwed on
3RV2901-0H
- Cover cap for transverse auxiliary switch for circuit breaker 3RV2
8US1251-5NT10
- device adapter S0, 32 A, for 60 mm busbar system, 45x 260 mm long, special lines welded-on, AWG 10, 99 mm long spacer enclosed with product mounting rail screwed on
3RV2901-1A
- Auxiliary switch can be mounted on the side 1 NO+1 NC screw terminal for circuit breaker 3RV2
3RV2901-1B
- Auxiliary switch can be mounted on the side 2 NO, screw terminal for circuit breaker 3RV2
3RV2901-1C
- Auxiliary switch can be mounted on the side 2 NC, screw terminal for circuit breaker 3RV2
3RV2901-1J
- Auxiliary switch can be mounted on the side 2 NO+2 NC screw terminal for circuit breaker 3RV2
3RV2921-1M
- signaling switch for circuit breaker 3RV2 with screw terminal
京公网安备 11011402011241号
