产品类别
- LOGO!逻辑模块
- SIMATIC S7-1200基本控制器
- SIMATIC S7-1500基本控制器
-
- CPU 1511-1 PN
- CPU 1511C-1 PN
- CPU 1511F-1 PN
- CPU 1512C-1 PN
- CPU 1513-1 PN
- CPU 1515-2 PN
- CPU 1516-3 PN/DP
- CPU 1517-3 PN/DP
- CPU 1518-4 PN/DPP
- CPU 1518-4 PN/DP MFP
- SM 521 数字输入模块
- SM 522 数字输出模块
- SM 523 数字输入输出模块
- SM 531模拟输入模块
- SM 532模拟输出模块
- SM 533模拟输入输出模块
- TM计数2x24V计数器模块
- TM POS2输入计数器和位置检测模块
- TM定时器DIDQ 16x24V基于时间的IO模块
- PTO的TM PTO 4接口模块（脉冲序列输出）
- TM Siwarex WP521 ST/WP522 ST重量模块
- CM PtP
- TIM 1531 IRC (for S7-1500)
- 控制柜用SCALANCE W774 RJ45
- 控制柜用SCALANCE W734 RJ45
- 前连接器
- 前连接器模块
- 连接电缆
- 连接模块
- 带有单线的前连接器
- HMI第二代标准设备
- 常规SINAMICS G 变频器
- SINAMICS S120 驱动系统
- V90 伺服电机
- 1PH8 异步电机
- 1PH8 伺服电机 (同步)
- 电源电缆 （预装/原装线缆）
- 信号电缆 （预装/原装线缆）
-
- 信号电缆，适用于SINUMERIK 808D高级
- 信号电缆，适用于SINUMERIK 828D-PPU 27x.4/PPU 290.4
- 信号电缆，适用于SINUMERIK 840D sl - NCU 7x0.3
- 信号电缆，适用于SINUMERIK TCU
- 信号电缆，适用于SINUMERIK HT 2/HT 8/HT 10
- 信号电缆，适用于SINUMERIK Analog Drive Interface for 4 Axes ADI 4
- 信号电缆，适用于SINUMERIK PP 72/48D PN I/O module
- 信号电缆，适用于SIMOTION C240/C240 PN Motion Controllers
- 信号电缆，适用于SIMOTION D410-2 Control Units
- 信号电缆，适用于SIMOTION D4x5-2 Control Units
- 信号电缆，适用于SIMOTION D4x5-2 Control Units
- SINAMICS S110 信号电缆
- SINAMICS S120 信号电缆，用于生产机械
- SINAMICS S120 信号电缆，用于生产机械
- 信号电缆，适用于SINAMICS S120 Motor Module - SINUMERIK 828D
- 信号电缆，适用于SINAMICS S120 Motor Module - SINUMERIK 840D sl
- 信号电缆，适用于SINAMICS S120 Motor Module - SINUMERIK ONE
- 信号电缆，适用于SINAMICS S120 Motor Module - SIMOTICS L-1FN3
- 信号电缆，适用于SINAMICS S120 Motor Module - SIMOTICS M-1FE1/M-1FE2 und T-1FW6
- 信号电缆，适用于SINAMICS S120 Motor Module - SIMOTICS 2SP1
- 信号电缆，适用于SINAMICS S120 Motor Module - SIMOTICS 2SP1 with SMI24
- 信号电缆，适用于SINAMICS S120M - distributed servo drive
- 信号电缆，适用于SINAMICS S120 Combi Power Module - SINUMERIK 840D sl
- 信号电缆，适用于SINAMICS S120 Combi Power Module - SINUMERIK 828D
- 信号电缆，适用于SINAMICS S120 - SIMOTICS S-1FT7/S-1FK7
- 信号电缆，适用于SINAMICS S120 - SIMOTICS RJ45/M17 and external measuring systems M12/RJ45
- 信号电缆，适用于SINAMICS S120 Control Units CU320-2
- 信号电缆，适用于SINAMICS S120 SMC10
- 信号电缆，适用于SINAMICS S120 SMC20
- 信号电缆，适用于SINAMICS S120 SMC30
- 信号电缆，适用于SINAMICS S120 HLA
- SINAMICS V70伺服驱动器的运动连接电缆
- SINAMICS V70主轴驱动的运动连接电缆
- IE FC TP 电缆 2 x 2
- PROFIBUS FastConnect
- SpliTConnect
- AS-Interface 异形电缆
- 1FT7 伺服电机
- 1FK7 伺服电机
- 1FK2 伺服电机
- SIMOTICS L 直线电机
- SIMOTICS T 扭矩电机
- SIMOTICS S-1FG1 伺服齿轮电机
- 电机主轴
- 驱动技术其他部件
- SIMATIC HMI 控制和监视系统
- SIMATIC HMI 附件
-
- WinCC DataMonitor
- WinCC/DataMonitor
- IE FC TP cable 4 x 2
- IE FC TP cable 2 x 2
- IE FC RJ45 plug 4 x 2, Cat6a
- IE FC RJ45 接头 2 x 2，Cat5e
- RS 485 总线连接器
- IE TP 软线
- 连接电缆
- 连接电缆 830-1T
- 存储卡
- 服务包
- 工业 4 口 USB Hub
- 电源
- 电池
- 后盖
- 夹架
- 运输和储存包
- 防护罩
- 保护膜
- 贴标条
- 输入装置
- 触摸屏手写笔和触控笔
- HMI连接配件
- 适合控制柜的 SCALANCE W788 RJ45
- 室内用 SCALANCE W788 M12
- 适合广泛环境条件的 SCALANCE W788 M12 EEC
- 户外用 SCALANCE W786 RJ45
- 户外用的 SCALANCE W786 SFP
- 适合控制柜的 SCALANCE W774 RJ45
- 适合广泛环境条件的 SCALANCE W774 M12 EEC
- 适合控制柜的 SCALANCE W761 RJ45
- KEY-PLUG W700
- PS791-2DC 和 PS791-2AC 电源
- PS791-2DC 和 PS791-2AC 电源
- SIMATIC RF1070R
- 电子标签 MDS E600
- MDS D100
- 其它附件
- SIMATIC HMI 软件
-
- SIMATIC WinCC (TIA Portal) Engineering
- WinCC Runtime Advanced
- WinCC Runtime Professional
- WinCC Runtime 通信
- WinCC Recipes
- WinCC Logging
- WinCC Audit
- WinCC Sm@rtServer
- SIMATIC Logon
- WinCC Server / WinCC Client
- WinCC Redundancy
- WinCC WebNavigator
- WinCC WebUX
- WinCC DataMonitor
- WinCC IndustrialDataBridge
- SIMATIC Process Historian
- SIMATIC Information Server
- 低压电机(标准工业电机)
- 低压大功率电机
- 其他产品
相关下载
产品筛选
> 3RH2122-1BB40 > 返回
现货推荐产品
相关配套产品
3RH2122-2BB40
- contactor relay, 2 NO + 2 NC, 24 V DC, spring-loaded terminal, frame size S00
3RH2122-4BB40
- contactor relay, 2 NO + 2 NC, 24 V DC, ring cable lug connection, frame size S00
3RT2916-1BB00
- surge suppressor, varistor, 24-48 V AC, 50/60 Hz, 24-70 V DC, for contactors 3RT2.1 and auxiliary contactors 3RH2
3RT2916-1CB00
- surge suppressor, RC element, 24-48 V AC, 50/60 Hz, 24-70 V DC, for contactors 3RT2.1 and auxiliary contactors 3RH2
3RT2916-1DG00
- surge suppressor, suppression diode 12-250 V DC, for contactors 3RT2.1 and auxiliary contactors 3RH2
3RT2916-1EH00
- surge suppressor, diode combination, 12-250 V DC, for contactors 3RT2.1 and auxiliary contactors 3RH2
3RT2916-1JJ00
- surge suppressor, varistor with LED, 24-48 V AC, 50/60 Hz, 12-24 V DC, for contactors 3RT2.1 and auxiliary contactors 3RH2
3RT2916-1LM00
- surge suppressor, suppression diode with LED, 24-70 V DC, for contactors 3RT2.1 and auxiliary contactors 3RH2
3RH2911-1FA22
- auxiliary switch, on the front, 2 NO + 2 NC, .3/.4, .1/.2, .1/.2, .3/.4, current path: 1 NO, 1 NC, 1 NC, 1 NO, screw terminal, for contactors 3RT2 and contactor relays 3RH2
3RH2911-1HA22
- auxiliary switch, on the front, 2 NO + 2 NC, .1/.2, .1/.2, .3/.4, .3/.4, current path: 1 NC, 1 NC, 1 NO, 1 NO, screw terminal, for contactors 3RT2 and contactor relays 3RH2
3RH2916-1FA22
- auxiliary switch, on the front, 2 NO + 2 NC, .3/.4, .1/.2, .1/.2, .3/.4, current path: 1 NO, 1 NC, 1 NC, 1 NO, screw terminal, for contactors 3RT2 and contactor relays 3RH2
3RA2813-1AW10
- solid-state time-delayed auxiliary switch, ON-delay, relay: 1 CO, time range 0.05-100 s, 24-240 V AC/DC, 50/60 Hz, varistor for attenuation of the contactor coils integrated, screw terminal, can be snapped onto the front on contactors 3RT20 and contactor relays 3RH2
3RA2813-1FW10
- solid-state time-delayed auxiliary switch, ON-delay, relay 1 NC + 1 NO, time range 0.05-100 s, 24-240 V AC/DC, 50/60 Hz, varistor for attenuation of the contactor coils integrated, screw terminal, can be snapped onto the front on contactors 3RT20 and contactor relays 3RH2
3RA2814-1AW10
- solid-state time-delayed auxiliary switch, off delayed, with control signal, relay: 1 CO, time range 0.05-100 s, 24-240 V AC/DC, 50/60 Hz, varistor for attenuation of the contactor coils integrated, screw terminal, can be snapped onto the front on contactors 3RT20 and contactor relays 3RH2
3RA2814-1FW10
- solid-state time-delayed auxiliary switch, off delayed, with control signal, relay 1 NC + 1 NO, time range 0.05-100 s, 24-240 V AC/DC, 50/60 Hz, varistor for attenuation of the contactor coils integrated, screw terminal, can be snapped onto the front on contactors 3RT20 and contactor relays 3RH2
3RA2815-1AW10
- solid-state time-delayed auxiliary switch, off delayed, without control signal, relay: 1 CO, time range 0.05-100 s, 24-240 V AC/DC, 50/60 Hz, varistor for attenuation of the contactor coils integrated, screw terminal, can be snapped onto the front on contactors 3RT20 and contactor relays 3RH2
3RA2815-1FW10
- solid-state time-delayed auxiliary switch, off delayed, without control signal, relay 1 NC + 1 NO, time range 0.05-100 s, 24-240 V AC/DC, 50/60 Hz, varistor for attenuation of the contactor coils integrated, screw terminal, can be snapped onto the front on contactors 3RT20 and contactor relays 3RH2
3RH2911-1AA01
- auxiliary switch, on the front, 1 NC, 71/72, current path: 1 NC, cable entry from the top, screw terminal, for contactors 3RT2 and contactor relays 3RH2
3RH2911-1AA10
- auxiliary switch, on the front, 1 NO, 73/74, current path: 1 NO, cable entry from the top, screw terminal, for contactors 3RT2 and contactor relays 3RH2
3RH2911-1BA01
- auxiliary switch, on the front, 1 NC, 71/72, current path: 1 NC, cable entry from below, screw terminal, for contactors 3RT2 and contactor relays 3RH2
3RH2911-1BA10
- auxiliary switch, on the front, 1 NO, 73/74, current path: 1 NO, cable entry from below, screw terminal, for contactors 3RT2 and contactor relays 3RH2
3RH2911-1HA02
- auxiliary switch, on the front, 2 NC, .1/.2, .1/.2, --/--, --/--, current path: 1 NC, 1 NC, --, --, screw terminal, for contactors 3RT2 and contactor relays 3RH2
3RH2911-1HA11
- auxiliary switch, on the front, 1 NO + 1 NC, .1/.2, .3/.4, --/--, --/--, current path: 1 NC, 1 NO, --, --, screw terminal, for contactors 3RT2 and contactor relays 3RH2
3RH2911-1HA20
- auxiliary switch, on the front, 2 NO, .3/.4, .3/.4, --/--, --/--, current path: 1 NO, 1 NO, --, --, screw terminal, for contactors 3RT2 and contactor relays 3RH2
3RH2911-1XA31-0MA0
- auxiliary switch, on the front, 3 NO + 1 NC, 53/54, 61/62, 73/74, 83/84, current path: 1 NO, 1 NC, 1 NO, 1 NO, screw terminal, for contactors 3RT2 and contactor relays 3RH2
3RH2911-1FA40
- auxiliary switch, on the front, 4 NO, .3/.4, .3/.4, .3/.4, .3/.4, current path: 1 NO, 1 NO, 1 NO, 1 NO, screw terminal, for contactors 3RT2 and contactor relays 3RH2
3RH2911-1FB11
- auxiliary switch, on the front, 1 NO + 1 NC, 11 U, .7/.8, --/--, .5/.6, --/--, current path: 1 NO (leading), --, 1 NC (lagging), --, screw terminal, for contactors 3RT2 and contactor relays 3RH2
3RH2911-1FB22
- auxiliary switch, on the front, 2 NO + 2 NC, 11 U, .3/.4, .1/.2, .5/.6, .7/.8, current path: 1 NO, 1 NC, 1 NC (lagging), 1 NO (leading), screw terminal, for contactors 3RT2 and contactor relays 3RH2
3RH2911-1FC22
- auxiliary switch, on the front, 2 NO + 2 NC, 22 U, .7/.8, .7/.8, .5/.6, .5/.6, current path: 1 NO (leading), 1 NO (leading), 1 NC (lagging), 1 NC (lagging), screw terminal, for contactors 3RT2 and contactor relays 3RH2
3RH2911-1HA01
- auxiliary switch, on the front, 1 NC, .1/.2, --/--, --/--, --/--, current path: 1 NC, --, --, --, screw terminal, for contactors 3RT2 and contactor relays 3RH2
3RH2911-1HA12
- auxiliary switch, on the front, 1 NO + 2 NC, .1/.2, .1/.2, .3/.4, --/--, current path: 1 NC, 1 NC, 1 NO, --, screw terminal, for contactors 3RT2 and contactor relays 3RH2
3RH2911-1HA31
- auxiliary switch, on the front, 3 NO + 1 NC, .1/.2, .3/.4, .3/.4, .3/.4, current path: 1 NC, 1 NO, 1 NO, 1 NO screw terminal, for contactors 3RT2 and contactor relays 3RH2
3RH2911-1LA11
- auxiliary switch, on the front, 1 NO + 1 NC, 73/74, 81/82, current path: 1 NO, 1 NC, cable entry from the top, screw terminal, for contactors 3RT2 and contactor relays 3RH2
3RH2911-1LA20
- auxiliary switch, on the front, 2 NO, 73/74, 83/84, current path: 1 NO, 1 NO, cable entry from the top, screw terminal, for contactors 3RT2 and contactor relays 3RH2
3RH2911-1MA11
- auxiliary switch, on the front, 1 NO + 1 NC, 73/74, 81/82, current path: 1 NO, 1 NC, cable entry from below, screw terminal, for contactors 3RT2 and contactor relays 3RH2
3RH2911-1MA20
- auxiliary switch, on the front, 2 NO, 73/74, 83/84, current path: 1 NO, 1 NO, cable entry from below, screw terminal, for contactors 3RT2 and contactor relays 3RH2
3RH2911-1NF02
- auxiliary switch, solid-state compatible, on the front, 2 NC, .1/.2, --/--, --/--, .1/.2, current path: 1 NC (solid-state compatible), --, --, 1 NC (solid-state compatible), screw terminal, for contactors 3RT2 and contactor relays 3RH2
3RH2911-1NF11
- auxiliary switch, solid-state compatible, on the front, 1 NO + 1 NC, .3/.4, --/--, --/--, .1/.2, current path: 1 NO (solid-state compatible), --, --, 1 NC (solid-state compatible), screw terminal, for contactors 3RT2 and contactor relays 3RH2
3RH2911-1NF20
- auxiliary switch, solid-state compatible, on the front, 2 NO, .3/.4, --/--, --/--, .3/.4, current path: 1 NO (solid-state compatible), --, --, 1 NO (solid-state compatible), screw terminal, for contactors 3RT2 and contactor relays 3RH2
3RH2911-1FA22-0MA0
- auxiliary switch, on the front, 2 NO + 2 NC, .3/.4, .3/.4, .1/.2, .1/.2, current path: 1 NO, 1 NO, 1 NC, 1 NC, screw terminal, for contactors 3RT2 and contactor relays 3RH2
3RH2911-1FC30
- auxiliary switch, on the front, 3 NO, 30 U, 57/58, 67/68, 77/78, -/-, current path: 1 NO (leading), 1 NO (leading), 1 NO (leading), --, screw terminal, for contactors 3RT2 and contactor relays 3RH2
京公网安备 11011402011241号
